CubisNX-Hybrid series

At installations where a little extra in recorded quality is required, CubisNX-Hybrid system can expand your choice of analog channels to an extra 2 SDI Megapixel cameras. All CubisNX models are upgradable, reducing the cost of High Definition Video Recording and at the same time introducing the Megapixel technology to the end user.
 

Integration with other systems

CubisNX-Hybrid integrates well with CubisCENTRAL centralized monitoring software for centralised management of multiple systems. More information on CubisCENTRAL can be found here.

A unified user experience

CubisNX-Hybrid is controlled and configured locally or remotely via the CubisNX software for unified user experience.

• LAN independency
  No network overhead for the use of megapixel cameras. The cameras transmit images to CubisNX-MP system though RG-11 cables and SDI interface
• Total system redundancy
  No footage lost due to active devices failure such as Switches, Hubs etc. that are typically used in a LAN configuration
• Unrestricted cabling routes
  Megapixel Cameras can be installed more than 100 meters away from the CubisNX-Hybrid system. Hundreds of meters can be covered through SDI repeaters
• Building a High-Definition CCTV system with minimum cost
  Take the benefit of the SDI Megapixel solution without the increased cost of installing a separate local LAN. Just select the locations where the Megapixel cameras are required and treat the rest of the project with cost saving analogue cameras/li>
• Intuitive Graphical User Interface (GUI) – CubisNX S/W
  All actions are as simple as a click. Take advantage of the plethora of features, CubisNX Software has to offer, locally or remotely
• Pentaplex operation
  Live monitoring, transmission, recording, analysis, playback
• Built in DVD-/+RW for instant video export
  Recorded video footage can easily be exported and burned into a DVD from within CubisNX software with no need for external software and complicated procedures
• Built-in RS-485 for controlling PTZ-PT-ZOOM cameras
  Almost every major PTZ controlling protocol is supported by CubisNX systems e.g. Pelco D-P, Sensormatic, Panasonic, TEV etc. Its incorporated RS-485 controller is connected via UTP to the camera’s controlling mechanism
• On-board Digital I/O card for controlling external devices by TTL pulses
  All CubisNX systems offer the installing engineer the ability to setup triggering from external devices (burglar alarm, sensors etc) and also control devices like flood lights, sirens, strobes etc. This is achieved with the on-board Digital I/O board, which comes standard on all models
• Dynamic xDSL support with built-in DynamicDNS client
  Full support for Dynamic IP addresses provided by most Internet Service Providers if the system is connected to the internet through an xDSL line. The built-in DynamicDNS updater supports most DynamicDNS services available and also provides a custom DNS service

Storage Calculator
This is a tool to calculate the required storage space based on average system performance. It allows you to calculate storage space for analog, megapixel and hybrid systems.

here